In this report we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and tricks that you can use.

For those who have a dog that likes to bark, and especially if your dog loves to play in the backyard and other areas of the home, you need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up which will look a little scary at first, but it is actually quite straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not just cut a rectangular shape out of the cardboard, so you will have to cut around the edge of the mask so you get something which resembles a cone. The most important thing here is to be realistic with what kind of paper plate that you’re using.

Then you will have to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so you can make certain that nothing will leak once you place the mask on. Be sure the edges are cut so that the edges are not sharp, as this healthiest cheap dog food can damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask , so you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.

Don’t fret too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it’ll leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint after you’re done, so that you don’t end up with smudges or smears on your dog.

Then it’s time to glue the mask on your dog’s head. First you need to make sure that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it is secure, then you can begin to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the base of the mask and then fold it over. Be sure that it’s quite powerful and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you have the mask snugged securely onto the face of your dog. Don’t make the folds too large or else it could look messy. Once you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask onto the dog. Be sure that the ears are level and be certain it is not too short or long as this will cause some issues with the mask slipping off the dog’s face.

If you’re using a dog mask because your pet security, you’ll need to do some sanding to be certain it is secure on your dog. You can accomplish this by sanding off any excess paper that may have been removed from your mask.